Influence of processing and clay type on nanostructure and stability of polypropylene–clay nanocomposites

Melt processing is a critical step in the manufacture of polymer articles and is even more critical when dealing with inhomogeneous polymer–clay nanocomposites systems. The chemical composition, and in particular the clay type and its organic modification, also plays a major contribution in determining the final properties and in particular the thermal and long-term oxidative stability of the resulting polymer nanocomposites. Proper selection and tuning of the process variable should, in principle, lead to improved characteristics of the fabricated product. With multiphase systems containing inorganic nanoclays, however, this is not straightforward and it is often the case that the process conditions are chosen initially to improve one or more desired properties at the expense of others.     

Film-forming characteristics and thermal stability of low viscosity benzoxazines derived from melamine

A novel class of low-viscosity benzoxazines has been synthesized from melamine and formaldehyde with phenol or bisphenol A. The striking feature of the class of benzoxazines is the subtle combination of their inherently low viscosity at room temperature, good film-forming characteristics and high chemical and thermal stability mainly due to the introduction of melamine into the network of the polymers. The structure of the benzoxazines has been confirmed by proton nuclear magnetic resonance spectroscopy and fourier transform infrared spectroscopy. Thermal properties of polybenzoxazine have been studied by differential scanning calorimetry, dynamic mechanical analysis and thermogravimetric analysis. Transparent polybenzoxazine films were easily obtained under solvent-free conditions, exhibiting significantly improved toughness compared to the conventional polybenzoxazines. Our research may open a new path for overcoming the present drawbacks of polybenzoxazines such as high brittleness, the difficulties in preparing films and poor processibility via tailoring the structures and properties of amine in the benzoxazines.     

饲料中激素类药物及其检测技术研究进展

综述了饲料中常用激素类药物的现状及分析技术。对激素类药物的种类、化学特性,应用情况及危害性进行了分析,对饲料中激素类药物残留的前处理和检测方法进行了介绍。重点研究关注了激素类药物和分析方法的异同,从而了解和掌握该领域发展动态,为建立健全相关的限量标准和检测方法提供参考。     

生物质与烟煤混合灰熔融特性影响因素的研究

为探究气氛、混合比及残炭含量对生物质与煤混合灰熔融特性的影响,将松木屑灰与乌海烟煤灰按不同质量比混合,采用智能灰熔点仪测定各混合灰样在不同气氛下的灰熔融温度,X射线衍射仪从矿物质演变角度分析混合灰熔融温度变化的原因。结果表明,由于铁尖晶石和铁橄榄石的生成,使混合灰的熔融温度在弱还原性气氛下比氧化性气氛下低,且差值的大小与混合灰中Fe含量有关;随松木屑灰含量的增加,钙铝黄长石、镁黄长石、白榴石等低温共熔物的生成量增加,使混合灰的熔融温度降低;此外,由于Fe-C共熔体(Fe_xC_y)的生成、灰锥局部还原性气氛及残炭的"骨架"作用,使混合灰的熔融温度随煤灰中残炭含量的增加呈现先升高后降低再升高的趋势。     

A dissipation‐free numerical method to solve one‐dimensional hyperbolic flow equations

In this paper, a numerical method to capture the shock wave propagation in 1‐dimensional fluid flow problems with 0 numerical dissipation is presented. Instead of using a traditional discrete grid, the new numerical method is built on a range‐discrete grid, which is obtained by a direct subdivision of values around the shock area. The range discrete grid consists of 2 types: continuous points and shock points. Numerical solution is achieved by tracking characteristics and shocks for the movements of continuous and shock points, respectively. Shocks can be generated or eliminated when triggering entropy conditions in a marking step. The method is conservative and total variation diminishing. We apply this new method to several examples, including solving Burgers equation for aerodynamics, Buckley‐Leverett equation for fractional flow in porous media, and the classical traffic flow. The solutions were verified against analytical solutions under simple conditions. Comparisons with several other traditional methods showed that the new method achieves a higher accuracy in capturing the shock while using much less grid number. The new method can serve as a fast tool to assess the shock wave propagation in various flow problems with good accuracy.     

Deposition of ZnS thin film by ultrasonic spray pyrolysis: effect of thickness on the crystallographic and electrical properties

Zinc sulfide (ZnS) thin films have been deposited on Si (1 0 0) substrate using ultrasonic spray pyrolysis. X-ray diffraction (XRD) analysis revealed that the films are (0 0 2) preferentially oriented with c-axis-oriented wurtzite structure. The crystallinity has been found to improve with film thickness in the 180–6000 nm range. Film structure has been analyzed by XRD, scanning electron microscope, FTIR, and Raman spectroscopies, while the stoichiometry has been verified by energy-dispersive spectroscopy and particle-induced X-ray emission techniques. Electrical properties of the grown films were characterized by current–voltage and capacitance–voltage measurements where, the films show better conducting behavior at higher thickness.     

Relation between Airy beams and triple-cusp beams

Airy beams and triple-cusp beams are two kinds of accelerating beams. The propagation characteristics and internal topological structures of accelerating Airy beams are well understood because of the developed mathematical theory about Airy function. However, limited information is available about the optical characteristics of accelerating triple-cusp beams. In this work, the relationship between Airy beams and triple-cusp beams is examined theoretically and experimentally. Results reveal some important optical characteristics of triple-cusp beams based on the optical characteristics of Airy beams. These findings are expected to provide a foundation for future applications of triple-cusp beams.     

Influence of growth temperature and post-annealing on an n-ZnO/p-GaN heterojunction diode

We report on an n-ZnO/p-GaN heterojunction diode fabricated from zinc oxide (ZnO) films at various growth temperatures (450, 500, 550, and 600 °C) by RF sputtering. The films were subsequently annealed at 700 °C in N₂ ambient. To investigate the influence of the growth temperature of n-ZnO films, the microstructural, optical, and electrical properties were measured using scanning electron microscopy (SEM), X-ray diffraction (XRD), photoluminescence (PL), and Hall measurements. The XRD pattern showed the preferred orientation along the c-axis (002) regardless of growth temperature. The PL spectra showed a dominant sharp near-band-edge (NBE) emission. Current–voltage (I–V) curves showed excellent rectification behavior. The turn-on voltage of the diode was observed to be 3.2 V for the films produced at 500 °C. The ideality factor of ZnO film was observed to be 1.37, which showed the best performance of the diode.     

退火温度对TiO2/CdSe纳米片异质结薄膜光电性能的影响

采用水热法在FTO上制备（001）高活性晶面主导的TiO₂纳米片薄膜,利用循环伏安法在TiO₂纳米片薄膜上沉积CdSe颗粒,制备了TiO₂/CdSe纳米片异质结薄膜。分别在150、250、350、450 ℃,氩气保护气氛中对样品进行退火。利用X射线衍射仪（XRD）、场发射扫描电镜（FESEM）、X射线光电子能谱分析仪（XPS）、紫外-可见（UV-Vis）分光光度计以及电化学工作站对不同温度退火后的TiO₂/CdSe纳米片异质结薄膜的微观形貌、晶体结构、光电化学性能进行表征和测试。结果表明：六方相CdSe纳米颗粒均匀包覆在TiO₂纳米片表面,直径30 nm左右;随着退火温度的升高CdSe纳米颗粒长大,形成光滑的CdSe薄膜,且晶化程度提高;TiO₂纳米片表面的Se元素与Cd元素发生氧化;TiO₂/CdSe纳米片异质结薄膜对可见光的吸收光谱发生红移,禁带宽度逐渐减小。光电化学性能测试表明随着退火温度的升高,TiO₂/CdSe纳米片异质结薄膜的光电流密度显著提高,开路电压减小,但由于SeO2和CdO的出现,导致填充因子减小,影响光电转换效率的提高。在本实验条件下,TiO₂/CdSe纳米片异质结薄膜的最佳退火温度为150 ℃,填充因子为0.77,光电转换效率达到3.12%。